Technische Spezifikationen von Zubehörteile für die Heizungsanlagenindustriei

Technische Spezifikationen und tests für Zubehörteile für die Heizungsanlagenindustriei

TECHNISCHE DATEN UND TESTVERFAHREN FÜR DIE ZUBEHÖRTEILE FÜR HEIZKÖRPER (in English

MT2000-2
Torsion's test for the body of the vent: Maximum torsion strength 75 Nm, to close we recommend 30 Nm.
Torsion's test on the screw: Maximum torsion strength 5 Nm, to close we recommend 1,2 Nm.
Seal's test: all the vents are automatically tested (6 bar), highest pressure applied in the test room (16 bar).

2201631*
Torsion's test for the stop: Maximum torsion strength 80 Nm, to close we recommend 35 Nm.
Seal's test: highest pressure applied in the test room (16 bar).

TAPPO1/2
Torsion's test for the stop: Maximum torsion strength 80 Nm, to close we recommend 35 Nm.
Seal's test: highest pressure applied in the test room (16 bar).

MT2000-3/8
Torsion's test for the body of the vent: Maximum torsion's strength 50 Nm, to close we recommend 22 Nm.
Torsion's test on the screw: Maximum torsion's strength 5 Nm, to close we recommend 1,2 Nm.
Seal's test: all the vents are automatically tested (8 bar), highest pressure applied in the test room (8 bar).

2201631-3/8
Torsion's test for the stop: Maximum torsion strength 70 Nm, to close we recommend 32 Nm.

MT200014
Torsion's test for the stop: Maximum torsion strength 35 Nm, to close we recommend 12 Nm.
Seal's test: highest pressure applied in the test room (8 bar).

TAPPO1/4
Torsion's test for the stop: Maximum torsion strength 35 Nm, to close we recommend 17 Nm.
Seal's test: highest pressure applied in the test room (8 bar).

MT200018
Torsion's test for the stop: Maximum torsion strength 30 Nm, to close we recommend 12 Nm.
Seal's test: highest pressure applied in the test room (8 bar).

MT52
Torsion's test for the stop: Maximum torsion strength 87 Nm, to close we recommend 40 Nm.
Seal's test: highest pressure applied in the test room (8 bar).

MT50
Torsion's test for the body of the vent: Maximum torsion's strength 88 Nm, to close we recommend 40 Nm.
Torsion's test on the screw: Maximum torsion's strength 5 Nm, to close we recommend 1,2 Nm.
Seal's test: all the vents are automatically tested (8 bar), highest pressure applied in the test room (8 bar).


With exception to particular specifications of the customer the thickness of the nickel - plating is 4 Micron.
With exception to particular specifications all the o-rings are in EPDM 70 Shore and They can be utilized with
temperature 110C°.
For a proper functioning of our products, we recommend not to let the heating system reach temperatures lower than 5°C.
All the products are recommended to be used with a maximum pressure of 8 bar.